Products Home | Metal Polish / Sealant | Britemax EASY CUT | Britemax EASY CUT
Key Points:Quickly and Easily Cut / Removes OxidationRemoves Problem StainsLeaves no heavy, hard to remove residueEasy On - Easy Off Application Can apply to warm metals and in direct sunlight Easy Cut cleans light to heavy oxidation easily from bare metals such as aluminum, brass, copper, magnesium, gold, silver, and blended metals. It quickly removes surface rust from chrome. Easy Cut contains a combination of solvents, chemicals, slip components, and extremely fine abrasives that react to break down oxidation. Together, these components work to quickly remove most surface problems. What used to take hours to clean with other metal cleaners can be done in minutes with relative ease delivering amazing results. Even the toughest oxidation is removed with little effort. For example, polished aluminum that has weathered can be cleaned to a bright polished finish in just minutes without feeling like your arms will fall off! Easy Cut is formulated to dry completely before wiping off the polishing residue and it can be used on warm to medium hot surfaces and in direct sunlight. Many other products require quick removal of the residue. For heavily oxidized surfaces Easy Cut application should be repeated a second time because the material removed in the first application contaminates the product. A second application makes a dramatic difference. Easy Cut should be followed with Final Shine metal polish/sealant when cleaning polished aluminum for an almost chrome like finish with a layer of resin polymer sealant to protect your work.Directions:Shake container well and often before and during use! Solids must be released from the bottom of the container before and during use to maintain consistency. Failure to do this will produce inferior results! Apply small amounts to a soft cloth and rub into surface with light to medium pressure. On metals such as aluminum, brass, or copper, rub until product turns black. On chrome or stainless steel rub into metal until stains are removed. Let the product dry completely to a grayish haze. With a clean dry cloth, remove the surface residue completely. Use Easy Cut twice to ensure a perfectly clean surface.Not for use on painted or clear coated, plated or anodized metalsWill not harm clear coats if wiped off early after contact.
